STL file Hammer 7 Millhill Sniper 🔨・Design to download and 3D

Por um escritor misterioso

Descrição

This is a Hammer 7 Paintball sniper that requires NO modifications to the Hammer 7 itself. That is something that has been a real challenge and I
This is a Hammer 7 Paintball sniper that requires NO modifications to the Hammer 7 itself. That is something that has been a real challenge and I'm extremely happy with the result. (First Strikes only) Hardware needed: - Super Stanchy Customs (HAMMER7 STRAIGHT - CENTER NPT - NO QD) - Macroline - 90 degree macroline fitting - Planet Eclipse pops on/off asa - Hammerhead Rifled Barrel Nuts, bolts and other: - 4pcs - 15x4mm brass (or other metal) pins - 1pcs - m8x130mm flat hex socket bolt - 1pcs - m8x25mm countersunk hex socket bolt - 4pcs - m8 locknuts - 3pcs - m8 1mm washer - 2pcs - m4x12mm countersunk hex socket bolt - 4pcs - m4 locknuts - 2pcs - m4x15mm countersunk hex socket bolt - 1pcs - m5x16mm button hex socket bolt - 3pcs - m5 locknuts - 2pcs - m5x12mm (included with ASA) - 2pcs - m8x55mm threaded rod - 2pcs - m6x115mm threaded rod - 2pcs - m5x90mm threaded rod - 2pcs - m14x130mm threaded rod - 5pcs - m3x20mm countersunk hex socket bolt - 5pcs - m3 nuts (about 2.4mm thick) For 1 magazine: - 4pcs - m3x20mm countersunk hex socket bolt - 4pcs - m3 nuts (about 2.4mm thick) - 1pcs - 20x4mm pin You are also going to need a good glue, preferably some epoxy glue, to assemble the Front_Stock_Body, Magwell_Stock_Body and Handle_Stock_Body. The Back_Stock_Body is removable using the M8x130mm Bolt, so the tank can be removed. The pictures of the printed one is not the final design, there are some small changes. For example the Charging Handle.