Intellinet 10G PoE++ Injector (561945) – Intellinet Europe

Por um escritor misterioso

Descrição

10G PoE++ Injector, One 95 W Port, IEEE 802.3bt (4PPoE) Compliant, Plastic Housing, Wall-mount Option
OverviewSpecificationsMore InformationDownloads Next-gen 10 Gbps 95 W 4PPoE Injector - Supports 10/100/1000/2500/5000/10,000 Mbps and Power over Ethernet 802.3bt The Intellinet Network Solutions 10G PoE++ Injector lets you connect your IEEE 802.3bt/af/at-compliant wireless access point, IP phone, network camera and more to a non-PoE LAN switch port while providing the necessary PoE power up to 100 meters (328 ft.). This 10-Gigabit 4PPoE Injector has an output power rating up to 95 watts, which is enough for even very power-hungry PoE++ devices like motorized PTZ cameras, thin clients, point-of-sale systems, lighting controllers and digital signage applications. Full backward-compatibility with existing IEEE 802.3af/at Power over Ethernet devices The Intellinet Network Solutions 10G PoE++ Injector helps you connect your IEEE 802.3bt/af/at-compliant products to a non-PoE LAN switch port. The Injector features auto-sensing technology, so it always delivers the correct wattage the device needs, whether it's PoE (up to 15.4 W), PoE+ (up to 30 W) or PoE++ (up to 95 W). Reduced wiring costs It's no longer necessary to run AC power lines for your wireless access point, network camera or IP phone. Simply connect this PoE++ Injector to a LAN switch port, and use the existing network cabling to deliver DC power as well as transfer data. Safe protection for your expensive network equipment The auto-sensing technology of this high-power PoE Injector ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages. Port surge protection up to 6 kV and ESD protection up to 8 kV make its safety complete. Wall-mount option For full installation flexibility, you can mount the injector on the wall through four built-in fixing points on the back panel. Power over Ethernet with output up to 95 watts Ultra-fast 10GBASE-T RJ45 Ethernet port, IEEE 802.3bz compliant Compatible with IEEE 802.3bt/at/af-compliant powered devices (PD) such as network cameras, wireless access points, VoIP phones and more Distance support up to 100 m (328 ft.) Internal power supply Auto-sensing PoE awareness to ensure that power is only sent to IEEE 802.3bt/at/af-compliant devices; non-PoE devices only receive data Short-circuit, overload and high-voltage protection Grounding point to protect equipment from external electrical surges Port surge protection up to 4 kV ESD protection up to 8 kV (air) and 6 kV (contact) Built-in wall-mounting holes and four rubber feet for desktop use Earthing kit included Ideal for power-hungry IoT devices like motorized IP cameras, thin clients, PoE lighting and more Saves time and money by delivering data and power via existing network cables Plug-and-play installation; no configuration required Fully NDAA-compliant Three-year warranty StandardsIEEE 802.3af (Power over Ethernet) IEEE 802.3at (High-Power PoE+ Power over Ethernet) IEEE 802.3bt (PoE++/4PPoE/Ultra Power over Ethernet) IEEE 802.3 (10Base-T Ethernet) IEEE 802.3u (100Base-TX Fast Ethernet) IEEE 802.3ab (1000BASE-T Gigabit Ethernet) IEEE 802.3bz (2.5G/5G/10GBASE-T Ethernet)General Media support: - 10Base-T Cat3/4/5/5e/6/6a UTP/STP RJ45 - 100Base-TX Cat5/5e/6/6a UTP/STP RJ45 - 1000Base-T Cat5e/6/6a UTP/STP RJ45 - 2.5G/5GBase-T Cat5e/Cat6/6a UTP/STP RJ45 - 10GBase-T Cat6/6a or higher UTP/STP RJ45 Ports: - One RJ45 10G data input port - One RJ45 PoE power + 10G data output port Certifications: CE, RoHS, FCC Class A, UKCA, NDAA PoE Pinout - Pin 1: DC (-) - Pin 2: DC (-) - Pin 3: DC (+) - Pin 4: DC (+) - Pin 5: DC (+) - Pin 6: DC (+) - Pin 7: DC (-) - Pin 8: DC (-)LEDs Power PoE PoE maxDIP switch functions to select the PoE standard of the connected PD: 802.3bt (for fully compliant 802.3bt/at/af PDs) UPoE (for PDs that support the maximum power from PSE over four pairs, regardless of the PD class, including Cisco Universal Power over Ethernet) Legacy 802.3bt (for PDs not in full compliance with 802.3bt/at/af)Power Internal power supply: - Input: 100.0 - 240.0 VAC, 50 - 60 Hz - Output: DC, 54.0 V, 1.76 A - PoE budget: 95.0 watts (maximum) - Power consumption: 100.0 watts (maximum)Physical Plastic housing Dimensions (L x W x H): 172 x 100 x 40 mm (6.77 x 3.94 x 1.57 in.) Net weight: 500 g (1.1 lbs.) Gross weight: 877 g (1.93 lbs.) Operating temperature: 0 - 40°C (32 - 104°F) Storage temperature: -40 - 70°C (-4 - 194°F) Operating humidity: 10 - 90% RH, non-condensing Storage humidity: 5 - 90% RH, non-condensingPackage Contents 10G PoE++ Injector Power cable Earthing kit Instructions Additional SKUs ASIN: B0BT55PDZQ EAN: 0766623561945 UPC: 766623561945 Physical Specifications Product net weight: 0.46 kg Product gross weight: 0.82 kg Dimensions: 172 (L) x 100 (W) x 40 (H) [mm] Packaging type: Retail Box Packaging dimensions: 235 x 190 x 86 [mm] Master Carton Quantity: 10 Master Carton Weight: 8.89 kg Master Carton Dimensions: 455 x 250 x 405 [mm] Datasheet Datasheet » Download Manual Quick Instruction Guide » Download