Cura 4.2.1 resumes printing at wrong layer height after pausing at specified layer number · Issue #6369 · Ultimaker/Cura · GitHub
Por um escritor misterioso
Descrição
Application version 4.2.1 Platform Windows 8.1, GPU: Radeon RX580 Printer Creality Ender-5 Reproduction steps Simply slice a print with an optional post-processing option "Pause at Layer Number" configured. Actual results When the Gcode
When I try to pause at a layer height in Cura, it pauses, then
4.0.0] Pause at Height plugin restarts too high · Issue #5924
Cura 4.10.0 Pause at Height/Layer corrupts line width and layer
Cura 4.2.1 resumes printing at wrong layer height after pausing at
Cura 4.10.0 Pause at Height/Layer corrupts line width and layer
Cura 4.4] Material / Initial Layer Flow not applied to all objects
Cura ignores overlap settings when printing One at a Time · Issue
TweakAtZ 4.0.2 Behavior issue - UltiMaker Cura - UltiMaker
4.5.0] Layer height Z-move change applied after Z-Hop When
4.2.1 Unnecessary Moves Between Layers · Issue #6216 · Ultimaker
4.6.1] Adaptive Layer Height not honoring Layer Height as minimum
Cura 4.4] Material / Initial Layer Flow not applied to all objects
Missing and incorrect support, Cura 4.2.0 and 4.2.1 · Issue #6176
Z Seam Alignment issue · Issue #8704 · Ultimaker/Cura · GitHub
de
por adulto (o preço varia de acordo com o tamanho do grupo)
/i.s3.glbimg.com/v1/AUTH_08fbf48bc0524877943fe86e43087e7a/internal_photos/bs/2020/o/Q/YyVs4ORQ6kb76RdwoZEw/captura-de-tela-2020-06-17-as-11.19.43.png)
